HEAT PIPE SYSTEM

.Start up quickly, heat pipe transfer the heat energy into the storage tank

.With standard pressure of 8 bar, can be connected directly with tap water

.No water in the vacuum tubes, the heat pipe water heater still works even with several tubes broken

.Simple structure makes installation quick and easy

.Can be used all year around even in the cold climate (high latitude)

HEAT PIPE PLUS SYSTEM

.Start up quickly, heat pipe transfer the heat energy into the storage tank

.With standard pressure of 8 bar, can be connected directly with tap water

.No water in the vacuum tubes, the heat pipe water heater still works even with several tubes broken

.Simple structure makes installation quick and easy

.Can be used all year around even in the cold climate (high latitude)

Length	1800 mm
Outer tube diameter	58mm
inner tube diameter	47mm
Weight	2.2kg
Glass thickness	1.6mm
Evacuated Tubes	Borosilicate 3.3
Absorptive coating	Graded AL/N/AL
Vacuum degree	P<5x10-2Pa
Thermal expansion	3.3x10-6/ °C
Insolation Temperature	>200 °C
Absorptance	>96%
Emissivity	>4% (80 °C)
Heat loss	>0.8W/(m2 °C)
Maximum pressure	0.8Mpa
Resist wind	30m/s
Start-up temperature	≤25°C

- Apply for two layers 3.3 high boron sillicon glass tube

- The two layers glass tube, with same axis is vacuumzed between them, the vacuum

- Degree can reach 5+10-2Pa.

- Coated with AL\N\AL selective absorbing coathing material.

- High absorbing efficiency :The vacuum magnetic-control sputtering selective absorptive coating on the heat-collecting plates has a     high absorption coefficient of more than 96%, and the emission coefficient around 4%

- Long life: The life span can reach 15 years.

- Hegh practicabillity: Abe to endure impact of hall less than 25mm in deameter with high heat efficiency throughout the year.

- Heat Pipe High purity "Oxygen Free Copper"

- Heat Transfer Fin High Purity Alumiun.

- Copper Header Pipe Copper Maximum Pressure 800 kpa

- Tube Clips 301 Stainless Steel

- Fasteners 304 Stainless Steel

- Rubber Components HTV Silicone Rubber (UV Stabilized)

1. Hegh efficiency solar collector using heat pipe-double wall glass evacuated tubes.

2. Anti-freezing, work temperature:-40 °C-200 °C, Performance great in all climates.

3. No water flow in the evacuated tube, Tubes are easily replaced if broken and the broken tubes noteffect other tubes'working.

4. Easy plug-in installation for mounting on flat roof and inclined roof.

5. Working pressure: 6 bar.

6. Frame material: 6005-T5Aluminum Alloy.

7. Manifold material: Aluminum (5005-H16 Aluminum with Anodized)

8. Manifold insulator>30mm Glass wool

9. Weight 96kg.

10. Can form a large solar system supply hot water to hotel, restaurant, swimmingpool and so on.